Welcome to BPM Sport!

Back To Top

Electronic Dampening Control (EDC/VDC) - Reprogramming

More Views

Electronic Dampening Control (EDC/VDC) - Reprogramming

Availability: In stock

$300.00
Have you installed aftermarket coilovers or a non factory suspension setup on your BMW? Is your vehicle displaying Electronic Dampening Control (or Chassis Stabilization) Errors or Warnings as a result? If so, you're probably looking for EDC Elimination Coding. We can reprogram your vehicle the proper way, without using aftermarket "cancelers", resistors, or modules, to make the car happy again. This way you can drive your track-ready BMW fault-free. This activation requires no aftermarket modules, snipping of wires, soldering, or hardware modifications. Often times when the vehicle is not programmed for the suspension change, other than the warnings, you may not be able to use the Sport modes, or other functions of the vehicle. Our programming will solve all of that! PLEASE NOTE: You will have to disconnect your EDC/VDC module prior to the programming session! This module is located in the trunk of your vehicle.

Coding includes:
• Analysis of error codes
• Optional clearing of error codes
• Full Diagnostics of your vehicle

Model/Chassis of the vehicle.

** PLEASE ENTER THE FULL 17 DIGIT VIN NUMBER **

Characters left: 17

Please select the operating system being used.

* Required Fields

$300.00

Details

How does remote coding work?

Remote coding is a fairly simple process. We send you a cable and a flash drive/DVD loaded with the coding files. Once you have this, and after setting up the files, the coding session begins. We provide instructions on how to do this, or we can set up the files for you if you wish. Only basic computer skills are required, (copying files from the flash drive/DVD and joining network) and we take it from there.

What are the requirements for remote coding?

Requirements for remote coding are a fairly new PC laptop or MAC laptop. If you have a PC, we will provide all software required. If you have a MAC, you will need VMWare Fusion which can be downloaded from the internet. Other than the computer requirements, you will need a stable wired or wireless internet connection near the car. The cable can either be rented or purchased from us if you would like to keep it for future coding.

How do you accomplish the remote coding?

With 10+ years of both IT and Automotive programming expertise, remote coding has bridged both worlds for us. Rest assured that you are dealing with experts qualified to perform such upgrades to your vehicle. The preconfigured virtual machine that we provide via flash drive/download, has all of the tools and utilities for us to accomplish the coding. No complex set up is required, and no changes to your computer settings are necessary. The coding is quick, efficient, and painless. we use 100% factory BMW tools to accomplish the coding. You can expect full functionality without any compromise whatsoever. Coding requires absolutely no physical modification to your vehicle, the features are accomplished via software coding only. No changes will result in any error/warning lights, sounds, or messages.

Will coding void my warranty or cause any issues at the dealership?

Absolutely not. Being that we use 100% factory tools to perform these feature activations – to the dealer it looks as if your car left the factory floor already equipped with the coded options. The dealer can interact with your vehicle as if it were a stock car because, well it is. All of the features we activate are factory options that came disabled. There is absolutely no risk involved, even if the internet connection dropped during the coding, your vehicle would still be 100% safe. We have designed this coding system with multiple scenarios in mind, and after vigorous testing, it has our and our customer's seal of approval for use around the world.

How long will the remote coding take?

The initial set up of the coding machine will take about ten (10) to fifteen (15) minutes. Once we are connected to your vehicle, the remote coding time varies depending on the options that are selected. For few options, the coding will take about twenty minutes. If you have a slew of options, the maximum you should expect the coding to take is roughly 45 minutes. From start to finish you are looking at roughly an hour maximum – not bad!


If you have any questions, please do not hesitate to contact us!

Additional Information

Brand BPMSport
Product Details No
Free Shipping Yes

You may also be interested in the following product(s)

Combox Retrofit (Bluetooth Streaming)

Combox Retrofit (Bluetooth Streaming)

Regular Price: $1,049.00

Special Price: $849.00

BPM E-Series Coding Cable

BPM E-Series Coding Cable

$100.00
BMW CIC iDrive Navigation Retrofit (2004-2009 BMWs)

BMW CIC iDrive Navigation Retrofit (2004-2009 BMWs)

$2,199.00
Tire Pressure Monitor Coding + More for E-Series

Tire Pressure Monitor Coding + More for E-Series

$300.00

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.