E9x M3 (2008-2013)

BPM Sport was created to provide the best ECU coding, tuning and performance engineering for the European car market. Our combined expertise ranging from IT engineering, market analysis, to race- proven cockpit experience, fuels our passion for cars. Our goal is to help envision, create and tune the best aftermarket vehicles for our clientele.

Performance gains:
• Performance gains vary

Ships with:
• Tuning cable
• Tuning software download link 
• Installation Guide

Every tune includes:
• Tuning cable mated to your car 
• Reprogrammed torque management parameters 
• Reprogrammed Vanos control for maximum drivability 
• Smoother engine operation
• A custom tailored tune with the following below:

If you do not have an Ethernet port on your laptop, you can purchase a USB to Ethernet adapter online. E series vehicles may use MAC or PC and only require a standard USB port for connecting to the vehicle. If you have additional questions, please contact us at [email protected]

BPM Sport was created to provide the best ECU coding, tuning and performance engineering for the European car market. Our combined expertise ranging from IT engineering, market analysis, to race- proven cockpit experience, fuels our passion for cars. Our goal is to help envision, create and tune the best aftermarket vehicles for our clientele.

We offer two stages of Performance for the E9X M3 Software:

Stage I is designed for lightly modified or stock vehicles without changes to the primary catalysts.

Stage II is tailored to vehicles that have changes to the primary cats - such as an Akra system, high flow cats, test pipes/catless, etc.. We include the latest DME software (240E) update to ensure you are on the latest engine software version from BMW. You may benefit from the factory software update alone.

Both stages include user selectable options:

• Selective mapping of throttle response in Normal and Sport modes
• Raised redline to 8,500 or 8,600 RPM (Stock is 8400 RPM)
• Top speed limiter raise or removal (Stock is 155mph)
• Elimination of cold start routine for quieter and smoother starts
• Cold Start Rev Limit reduction 4,500 to keep the engine healthy
• Suppression of the Increased Emissions warning for exhaust changes

Both stages include our standard changes:
• Vanos changes for optimal driveability characteristics and power delivery
• Part throttle ignition and full throttle ignition optimization for your octane
• Part fueling and full throttle fueling optimizations
• Optimization of torque management parameters

Features can be picked independently and tailored to your specification. The price of the tune includes our specialty designed tuning cable and BPMFlash software. The software and cable are extremely easy to use, and we’re happy to provide remote support over the computer or phone. The cable and software can be used at any time.

With the software, you can:
• Identify your ECU and the software currently loaded
• Update your vehicles engine software to the latest version from BMW
• Flash the vehicle with Performance software suited to your specifications
• Flash the vehicle back to stock programming • Read fault codes from the engine control unit
• Clear service engine soon lights and fault codes
• Clear adaptation data

Performance gains:
• Gains are normally approximately 15-25HP and Torque, but can vary depending on the current software level and vehicle modifications. If your vehicle is on older software and with an exhaust change, you may gain up to 50 crank Horsepower between the software and exhaust modifications. Stage I vehicles with no modifications normally see gains in the 15-25HP and 10-20ft/lbs torque range. Stage II increases the gains that can be achieved when coupled with aftermarket exhaust systems. 

Every tune includes:
• Tuning cable mated to your car
• Reprogrammed torque management parameters
• Reprogrammed Vanos control for maximum drivability
• Smoother engine operation
• Tuning software download link
• Installation Guide
• A custom tailored tune with the following below:

Remote coding is one of the fastest, and cheapest ways to unlock the potential hidden within your BMW. From Angel Eye brightness to coding race seats a remote coding session is the easiest way to unlock those hidden features and solve/suppress unwanted error codes.

Below you can configure your own coding session with one of our professional coders. The options are endless and the list of categories is just the tip of the iceberg. **NOTE** This service includes European MDM (Euro Spec Traction Control) for BMW M3, M5, and M6 Models.  

Please see our coding list here for a list of features we offer with our coding service: http://www.bpmsport.com/BPMCoding.pdf

Categories of coding: 
• Lighting related 
• Airbag & restraint related 
• Car access related 
• iDrive related 
• Cluster related 
• Performance related

Minimum Computer Requirements:
 • Laptop with Intel Core 2 Duo: i3, i5, i7

 Coding includes:
• Analysis of error codes 
• Optional clearing of error codes 

If you have previously purchased our Feature Coding Service, but your vehicle has been flashed back to its stock features, you can purchase a re-coding for $200