Welcome to BPM Sport!

Back To Top

Performance Engine Software - BMW E9x M3 - 2007-2013

More Views

Performance Engine Software - BMW E9x M3 - 2007-2013

Availability: In stock

$899.00

BPM Sport was created to provide the best ECU coding, tuning and performance engineering for the European car market. Our combined expertise ranging from IT engineering, market analysis, to race- proven cockpit experience, fuels our passion for cars. Our goal is to help envision, create and tune the best aftermarket vehicles for our clientele.


We offer two stages of Performance for the E9X M3 Software:


Stage I is designed for lightly modified or stock vehicles without changes to the primary catalysts.


Stage II is tailored to vehicles that have changes to the primary cats - such as an Akra system, high flow cats, test pipes/catless, etc.. We include the latest DME software (240E) update to ensure you are on the latest engine software version from BMW. You may benefit from the factory software update alone.


Both stages include user selectable options:


• Selective mapping of throttle response in Normal and Sport modes
• Raised redline to 8,500 or 8,600 RPM (Stock is 8400 RPM)
• Top speed limiter raise or removal (Stock is 155mph)
• Elimination of cold start routine for quieter and smoother starts
• Cold Start Rev Limit reduction 4,500 to keep the engine healthy
• Suppression of the Increased Emissions warning for exhaust changes


Both stages include our standard changes:
• Vanos changes for optimal driveability characteristics and power delivery
• Part throttle ignition and full throttle ignition optimization for your octane
• Part fueling and full throttle fueling optimizations
• Optimization of torque management parameters


Features can be picked independently and tailored to your specification. The price of the tune includes our specialty designed tuning cable and BPMFlash software. The software and cable are extremely easy to use, and we’re happy to provide remote support over the computer or phone. The cable and software can be used at any time.


With the software, you can:
• Identify your ECU and the software currently loaded
• Update your vehicles engine software to the latest version from BMW
• Flash the vehicle with Performance software suited to your specifications
• Flash the vehicle back to stock programming • Read fault codes from the engine control unit
• Clear service engine soon lights and fault codes
• Clear adaptation data


Performance gains:
• Gains are normally approximately 15-25HP and Torque, but can vary depending on the current software level and vehicle modifications. If your vehicle is on older software and with an exhaust change, you may gain up to 50 crank Horsepower between the software and exhaust modifications. Stage I vehicles with no modifications normally see gains in the 15-25HP and 10-20ft/lbs torque range. Stage II increases the gains that can be achieved when coupled with aftermarket exhaust systems. 


Every tune includes:
• Tuning cable mated to your car
• Reprogrammed torque management parameters
• Reprogrammed Vanos control for maximum drivability
• Smoother engine operation
• Tuning software download link
• Installation Guide
• A custom tailored tune with the following below:

Region the vehicle is from.

** PLEASE ENTER THE FULL 17 DIGIT VIN NUMBER **

Characters left: 17

Model/Chassis of the vehicle.

What transmission does the car have?

Custom Performance Changes: Octane Tuning

Changes to Startup for Additional Safe Guards and Smoothness.

Remove factory restrictions to unleash your beast!

Gives the steering a more sporty feel.

For Vehicles with Modified or Removed Primary Catalyst.

Add Coding Services (Such as Euro MDM Traction Control) at a Reduced Rate

Please select which forum you're a member of.

Please select the operating system being used.

* Required Fields

$899.00

Details

Created with extensive research and a thorough understanding of the M3 MSS60 Digital Motor Electronics Unit, the BPMSport Performance engine software will unleash the full potential of your vehicle. Developed with 100's of hours of dyno testing, datalogging, and endurance testing, we retain factory safety safeguards while offering you a more dynamic and responsive driving experience.
Through careful remapping of the engine control software, various elements such as ignition timing, fuel delivery, VANOS position and part throttles are reworked to create performance gains.

We also rework the torque calculations correctly to give consistent power. The latest version of our ECU flash has been thoroughly developed and gives an actual gain in performance rather than just a quoted figure. The result is a car that feels far sharper and pulls harder through the rev band.

How it works:

1. Install the supplied software on your laptop (Windows XP/Vista/7/8/10)
2. Connect the cable to your OBD-II port and follow the provided instructions.
3. Use the BPMSport cable to load the tune into your vehicle. You can replace your original/tune file at will, and of course if you add modifications in the future, you use the same process to load on the new file we send you.

Benefits:

• Updates you to the latest BMW Software Version
• Takes advantage of the exhaust setup you have and the octane you use
• Read and Clear Fault Codes with our BPMFlash software and cable
• Safe, reliable, and extensively tested around the world 
• Restore your vehicle to the original configuration in under 10 minutes.

BPM Stage II w/ Full Akrapovic at the track

How does BPM Launch Assist work?

BPM Cold-Start Rev Limit Reduction

Enhanced Cold Start Rev Limit Reduction:

Stage II Dyno Video

Stage II Catless M3

 

BPMSport Valet Tune:

Additional Information

Brand BPMSport
Product Details No
Free Shipping noship

You may also be interested in the following product(s)

BMW Feature Coding and Programming (E-Series, 2000-2013)

BMW Feature Coding and Programming (E-Series, 2000-2013)

$300.00
Supercharger Engine Software - E9x M3 (S65B40) - 2007-2013

Supercharger Engine Software - E9x M3 (S65B40) - 2007-2013

$1,099.00
   

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.