Welcome to BPM Sport!

Back To Top

Coding

Sorting
  1. DME/ECU Unlock

    DME/ECU Unlock

    $300.00

    Unlocking Service for MEVD17.x DME Family for OBD Flashing with New Bootloader. The BMW S55/N55 powered vehicles with the Bosch MEVD17.2.x DME require a one-time bench flash to unlock OBD writing. The service is a 1 day turnaround and requires that you either mail in, or bring your ECU to BPM for modification. Once it has been bench flashed, OBD flashing can be utilized. No physical modifications to the control unit are performed. The control unit is never opened, drilled, or unsealed and will visibly look untouched. Learn More
  2. Instrument Cluster Diagnosis/Repair

    Instrument Cluster Diagnosis/Repair

    $500.00

    Are you experiencing problems with your instrument cluster? This service includes full diagnostics and disassembly of the cluster, and any associated encoding/programming. Note that this is not a guaranteed repair - if the hardware is faulty, parts, or the main board may need to be replaced. This will be at additional cost. Learn More
  3. Specific Coding/Programming Session

    Specific Coding/Programming Session

    $350.00

    This is a more advanced session that may include programming or encoding control units. Make sure that you have spoken with a BPMSport representative prior to checking out on the website. A coding cable is required for us to connect to the car remotely. You will also need a fairly recent laptop with an internet connection where the vehicle is located. Download links to our diagnostics tools will be sent to you after the order is processed. Learn More
  4. Special Diagnostics/Coding Session

    Special Diagnostics/Coding Session

    $500.00

    This is a more advanced diagnostic session that may include programming or encoding control units. Make sure that you have spoken with a BPMSport representative prior to checking out on the website. A coding cable is required for us to connect to the car remotely. You will also need a fairly recent laptop with an internet connection where the vehicle is located. Download links to our diagnostics tools will be sent to you after the order is processed. Learn More
  5. Remote Diagnostics Session

    Remote Diagnostics Session

    $200.00

    A diagnostics session via phone/computer to diagnose issues you are trying to resolve with your vehicle. Note that this does NOT include any programming/coding if needed! Learn More
  6. Consulting Session

    Consulting Session

    $350.00

    A consulting session via phone with our expert to discuss logistics of a custom build project. Learn More
  7. Tire Pressure Monitor Coding + More for E-Series

    Tire Pressure Monitor Coding + More for E-Series

    $300.00

    Have you installed aftermarket wheels on your BMW M3, M5, or M6? Is your vehicle displaying Tire Pressure Monitoring System Errors and Warnings as a result? If so, you're probably looking for TPMS Elimination Coding. We can remove the TPMS error for you, that way you can drive your track-ready BMW fault-free. If you happen to switch back to your stock TPMS suspension, it will still function as designed after our programming. This activation requires no aftermarket modules, snipping of wires, soldering, or hardware modifications. The TPMS elimination coding also includes our standard feature coding. Below you can configure your own coding session with one of our professional coders. The options are endless and the list of categories is just the tip of the iceberg. Categories of coding: • Lighting related • Airbag & restraint related • Car access related • iDrive related • Cluster related • Performance related Ships with: • OBDII to USB cable (Additional $125) • Software Downloads or DVD's Coding includes: • Analysis of error codes • Optional clearing of error codes • Full Diagnostics of your vehicle Learn More
  8. Electronic Dampening Control (EDC/VDC) - Reprogramming

    Electronic Dampening Control (EDC/VDC) - Reprogramming

    $300.00

    Have you installed aftermarket coilovers or a non factory suspension setup on your BMW? Is your vehicle displaying Electronic Dampening Control (or Chassis Stabilization) Errors or Warnings as a result? If so, you're probably looking for EDC Elimination Coding. We can reprogram your vehicle the proper way, without using aftermarket "cancelers", resistors, or modules, to make the car happy again. This way you can drive your track-ready BMW fault-free. This activation requires no aftermarket modules, snipping of wires, soldering, or hardware modifications. Often times when the vehicle is not programmed for the suspension change, other than the warnings, you may not be able to use the Sport modes, or other functions of the vehicle. Our programming will solve all of that! PLEASE NOTE: You will have to disconnect your EDC/VDC module prior to the programming session! This module is located in the trunk of your vehicle. Coding includes: • Analysis of error codes • Optional clearing of error codes • Full Diagnostics of your vehicle Learn More
  9. Race Seat MRS Airbag Elimination Coding

    Race Seat MRS Airbag Elimination Coding

    $350.00

    Have you installed BMW Performance Seats or non factory raceseats on your BMW M3, M5, or M6? Is your vehicle displaying Malfunctuion Restraint System Errors and Warnings as a result? If so, you're probably looking for MRS Elimination Coding. We can remove the MRS error for you, that way you can drive your track-ready BMW fault-free. This activation requires no aftermarket modules, snipping of wires, soldering, or hardware modifications. The MRS elimination coding also includes our standard feature coding. Below you can configure your own coding session with one of our professional coders. The options are endless and the list of categories is just the tip of the iceberg. Categories of coding: • Lighting related • Airbag & restraint related • Car access related • iDrive related • Cluster related • Performance related Ships with: • OBDII to USB cable (Additional $100) • Software Downloads or DVD's Coding includes: • Analysis of error codes • Optional clearing of error codes • Full Diagnostics of your vehicle Learn More
  10. DVD-In Motion Activation + More for E-Series

    DVD-In Motion Activation + More for E-Series

    $300.00

    Are you tired of those long boring trips with your family? DVD In-Motion Activation allows you to play movies through your CIC iDrive unit or iPhone while driving your vehicle. ATTENTION: PLEASE DO NOT DRIVE AND WATCH MEDIA THROUGH YOUR IDRIVE SYSTEM SIMULTANEOUSLY. YOU ARE PUTTING BOTH YOUR LIFE AND OTHERS IN DANGER!!! WE ARE NOT RESPONSIBLE FOR DAMAGES, INJURIES, OR DEATHS. PLEASE USE THIS AT YOUR OWN DISCRETION!!! DVD In-Motion Activation coding also includes our standard feature coding. Below you can configure your own coding session with one of our professional coders. The options are endless and the list of categories is just the tip of the iceberg. Categories of coding: • Lighting related • Airbag & restraint related • Car access related • iDrive related • Cluster related • Performance related Ships with: • OBDII to USB cable (Additional $125) • Software Downloads or DVD's Coding includes: • Analysis of error codes • Optional clearing of error codes • Full Diagnostics of your vehicle Learn More
  11. M3/M5 Cluster Retrofit Programming

    M3/M5 Cluster Retrofit Programming

    $400.00

    Retrofit your non-M model with the enhanced M3 or M5 Instrument cluster. We have successfully retrofitted the M3 and M5 clusters in E9x 328's and 335's as well as E6x 545/550/645/650 for numerous customers across the globe. With our coding services, we require you send in your cluster so we can properly program it in our lab. We promise quality and will not fall short of it. We will return the cluster in the same condition we receive it. With our coding, your M3 or M5 Cluster Retrofit will • Display the proper redline limit and warmup redline • Will not display the mileage tamper dot • Show the proper speed the vehicle is driving (digital and analog) • Indicate fuel level • Indicate oil temperature • Indicate any lights that should come on with use of the vehicle (CEL, headlights, etc.) ATTENTION: DCT CLUSTER RETROFITS WILL NOT ENABLE SHIFT LIGHTS FOR AUTOMATIC VEHICLES Learn More
  12. M-Drive / M Dynamic Mode Retrofit

    M-Drive / M Dynamic Mode Retrofit

    $1,049.00

    Activating the M Dynamic Mode and Dynamic Stability Control (DSC) gives your sports ambitions free rein. Drive slip for both longitudinal and transverse dynamics increases at all speed levels because DSC does not instantly intervene in the automobile's motion. For those people who did not select the M-Drive option when ordering your M3, or if you happen to get one used without it - this will give you the option to push your M3's handling limits without the danger of completely losing control.

    Ships with: 
    • Steering Switch Center Cluster (M-Drive Retrofit Hardware)
    • Instructions 
    • Download Links

    Every MDM Retrofit includes: 
    • A pre-scheduled coding session 
    • Optional clearing of error codes 

    Learn More
  13. CIC Programming/Activation

    CIC Programming/Activation

    $500.00

    We are happy to provide the option for customers to send in their CIC Unit for hardware activation. This process will allow us to activate your CIC for plug-and-play use, and does not use external emulators. Another huge benefit is that it retains the factory wiring and components, making installation a total breeze. After all is said and done, the CIC will work exactly as if your vehicle was equipped with it from the factory! You will have working voice control and navigation. This also includes a full software update to the operating system software in the navigation system, making it ready for future additions such as the Combox Retrofit and BMW Apps/Connected Drive. This also includes updating the maps to the 2019 version if you select this option during checkout. Please Note: In the majority of cases we are able to perform this programming remotely. In the case that your navigation system has an older software version, the CIC Unit will have to be mailed in to our local facility! An email with shipping instructions will be emailed after your order is placed. The shipping charges incurred at checkout are for the RETURN shipping to you. Turn around time is one business day. Please select the shipping speed you would like for the return shipment. Learn More
  14. Sirius/XM Satellite Radio Activation

    Sirius/XM Satellite Radio Activation

    $249.00

    We offer remote Sirius activation for vehicles with the 693 option. The activation will enable Sirius Satellite radio for vehicles 2010+ with the proper preparation from the factory. The remote activation also includes a one-year subscription to Sirius for newly activated radios. The activation is performed remotely and we'll provide the necessary download links. The overall process should take a little under an hour. If you're unsure on whether your car has option 693, please contact us. NOTE: Satellite Ready Vehicles: 1 Series (E82/E88) w/ Nav (SA609) - Vehicle Production Date 09/09~ 3 Series (E9X) w/ Nav (SA609) - Vehicle Production Date 09/09~ Z4 (E89) w/ Navigation (SA609) - Vehicle Production Date 09/09~ X5 (E70) - Vehicle Production Date 10/09~ X6 (E71) - Vehicle Production Date 10/09~ 5 Series GT (F07) - SOP & Later 7 Series (F01/F02/G11/G12) - 09/09~ 1-Series (F20/F21) 3-Series (F3X, Gxx) 4-Series (F3X, Gxx) 5-Series (F1X, Gxx) 6-Series (F1X) 8-Seres (Gxx) M3 & M4 (F8X) X1 (F48) X3 (F25,G01) X4 (G02) X5/X6 (F15/F16/F85/F86) X7 (G07) Mini Cooper 2012-2017 Once you place an order for this, we will place an order with BMW for the satellite radio activation code which will be uploaded to your vehicle. Once this code is received from BMW, your order is NOT REFUNDABLE.

    If you do not have an Ethernet port on your laptop, you can purchase a USB to Ethernet adapter online. E series vehicles may use MAC or PC and only require a standard USB port for connecting to the vehicle. If you have additional questions, please contact us at [email protected]

    Learn More
  15. BPM F-Series Coding Cable

    BPM F-Series Coding Cable

    $60.00

    OBDII Cable for coding: This cable is the same cable that we send to our customers for coding sessions. Whether you need a replacement cable or your just a hobbyist and are brave enough to take a peek around the internals of your car this cable will allow you to do just that. 

    Cable can help you code and read information from your car:
     
    • Analysis of error codes 
    • Optional clearing of error codes 
    • Airbag & restraint related 
    • Lighting related
    • Car access related 
    • iDrive related 
    • Cluster related 
    • Performance related

    Ships with: 
    • OBDII to Ethernet cable 
    • Drivers (Download link, thumbdrive or CD/DVD)

    THIS CABLE IS SOLD INDIVIDUALLY. DOES NOT INCLUDE REMOTE SERVICES.

    Learn More
  16. BMW Feature Coding and Programming (F & G-Series, 2009-2022)

    BMW Feature Coding and Programming (F & G-Series, 2009-2022)

    $250.00

    Remote coding is one of the fastest, and cheapest ways to unlock the potential hidden within your BMW. From Angel Eye brightness to coding race seats a remote coding session is the easiest way to unlock those hidden features and solve/suppress unwanted error codes.

    Below you can configure your own coding session with one of our professional coders. The options are endless and the list of categories is just the tip of the iceberg.  Please see our coding list here for a list of features we offer with our coding service: http://www.bpmsport.com/FCoding.pdf

    Categories of coding:
     
    • Lighting related 
    • Airbag & restraint related 
    • Car access related 
    • iDrive related 
    • Cluster related 
    • Performance related

    Minimum Computer Requirements:
     • Laptop with Intel Core 2 Duo Processor: i3, i5, or i7

    Coding includes:
    • Analysis of error codes 
    • Optional clearing of error codes 

    **NOTE** Your computer must have an Ethernet port or you must have a USB to Ethernet adapter to use this cable.

    If you have previously purchased our Feature Coding Service, but your vehicle has been flashed back to its stock features, you can purchase a re-coding for $200

    Learn More
  17. BPM E-Series Coding Cable

    BPM E-Series Coding Cable

    $100.00

    DCAN Cable for coding: This cable is the same cable that we send to our customers for coding sessions. Whether you need a replacement cable or you're just a hobbyist and are brave enough to take a peek around the internals of your car, this cable will allow you to do just that. 

    Please see our coding list here for a list of features we offer with our coding service: http://www.bpmsport.com/BPMCoding.pdf

    Compatible car brands: 
    • BMW

    Ships with: 
    • OBDII to USB cable 

    **Please note that this cable is suitable for coding, diagnostics, and battery resets. It does not support tuning.

    Learn More
  18. BMW Feature Coding and Programming (E-Series, 2000-2013)

    BMW Feature Coding and Programming (E-Series, 2000-2013)

    $300.00

    Remote coding is one of the fastest, and cheapest ways to unlock the potential hidden within your BMW. From Angel Eye brightness to coding race seats a remote coding session is the easiest way to unlock those hidden features and solve/suppress unwanted error codes.

    Below you can configure your own coding session with one of our professional coders. The options are endless and the list of categories is just the tip of the iceberg. **NOTE** This service includes European MDM (Euro Spec Traction Control) for BMW M3, M5, and M6 Models.  

    Please see our coding list here for a list of features we offer with our coding service: http://www.bpmsport.com/BPMCoding.pdf


    Categories of coding:
     
    • Lighting related 
    • Airbag & restraint related 
    • Car access related 
    • iDrive related 
    • Cluster related 
    • Performance related

    Minimum Computer Requirements:
     • Laptop with Intel Core 2 Duo: i3, i5, i7

     Coding includes:
    • Analysis of error codes 
    • Optional clearing of error codes 

    If you have previously purchased our Feature Coding Service, but your vehicle has been flashed back to its stock features, you can purchase a re-coding for $200

    Learn More